Citation: | ZHAO Yan-fei, SUI Yun-kang, YE Hong-ling. Optimum Design of Shell Structures With Frequency Constraints Based on Response Surface Methodology[J]. Journal of Beijing University of Technology, 2006, 32(S1): 19-23. |
[1] |
陈建军,车建立,崔明涛,等.结构动力优化设计评述与展望[J].力学进展,2001(2):181—192.CHEN Jian-jun, CHE Jian-li, CUI Ming-tao, et al. A review on structural dynamic optimum design[J]. Advances Mechnics, 2001(2):181-192. (in Chinese)
|
[2] |
SADEK E A. Dynamic optimization of framed structures with variable layout[J]. International Journal for Numerical Method in Engineering,1986, 23(7): 1273-1294.
|
[3] |
LIU Ying-wei, MOSES F. Sequential response surface method and its application in the reliability analysis of aircraft structural systems[J]. Structural Safety,1994, 16(1/2): 39-46.
|
[4] |
王永菲,王成国.响应面法的理论与应用[J].中央民族大学学报,2005(8):236—240.WANG Yong-fei, WANG Cheng-guo. The application of response surface methodology[J]. J of the Central Univeristy for Nationalities, 2005(8): 236-240. (in Chinese)
|
[5] |
隋允康.建模·变换·优化——结构综合方法新进展[M].大连:大连理工大学出版社,1996.
|
[6] |
ROUX W J, DU PREEZ R J, STANDER N. Design optimization of a semi-solid tyre using response surface approximations [J]. Engineering Computations, 1999, 16(2): 165-184.
|
[7] |
ROBERO V. Response surface methods for high dimensional structural design problems[D]. Florida: University of Florida, 2000.
|
[8] |
TODD M D. Response surface optimization techniques for multiple objective and randomly valued independent variable problems [D]. Florida: University of Florida, 2000.
|
[9] |
KURTARAN K, ESKANDARIAN A, MARZOUGUI D, et al. Crashworthiness design optimization using successive response surface approximations[J]. Computational Mechanics, 2002, 29: 409-421.
|
[10] |
JANSSON T, NILSSON L, REDHE M. Using surrogate models and response surfaces in structural optimization-with application to crashworthiness design and sheet metal forming[J]. Struct Multidisc Optim, 2003, 25:129-140.
|
[11] |
林家浩.有频率禁区的结构优化设计[J].大连工学院学报,1981,20(1):27—36.LIN Jia-hao. Optimum design of structures with specified non-frequency-band[J]. Journal of Dalian University of Technology, 1981, 20(1): 27-36. (in Chinese)
|
[1] | YE Hongling, WANG Xiuhua, WANG Weiwei, WANG Zhenqi. Mechanical Properties Analysis and Optimization Design for Bistable Hybrid Composite Shells[J]. Journal of Beijing University of Technology, 2022, 48(11): 1113-1121. DOI: 10.11936/bjutxb2021040028 |
[2] | ZHANG Chengyu, YUAN Yanping, ZENG Yong, CHEN Jimin. Simulation and Optimization on Parameters of Pneumatic Jet Bioreactor Defoamer[J]. Journal of Beijing University of Technology, 2022, 43(3): 230-242. DOI: 10.11936/bjutxb2021080024 |
[3] | YE Hongling, WANG Zhenqi, WANG Xiuhua. Quasi-static Compression Mechanical Properties Analysis and Optimization Design for Origami-based Meta-structure[J]. Journal of Beijing University of Technology, 2022, 48(2): 105-113. DOI: 10.11936/bjutxb2020110037 |
[4] | DU Jia-zheng, LU Li-han, ZHAO Zhen-yang. Topology Optimization for Frame Structures With Base Frequency Constraint[J]. Journal of Beijing University of Technology, 2015, 41(4): 534-541. DOI: 10.11936/bjutxb2014080024 |
[5] | SUI Yun-kang, ZHANG Xuan, YU Hui-ping. Improvement and Application on Response Surface Methodology in Shape Optimization[J]. Journal of Beijing University of Technology, 2008, 34(1): 31-36,64. |
[6] | YE Hong-ling, SUI Yun-kang, DU Jia-zheng. Topological Optimization Analysis of Continuum Structure With Displacement Constraints[J]. Journal of Beijing University of Technology, 2007, 33(9): 908-914. |
[7] | YE Hong-ling, SUI Yun-kang, LIU Zhao-miao. Topological Optimization Analysis of Two-dimensional Continuum Thin Plate Structure[J]. Journal of Beijing University of Technology, 2007, 33(8): 785-790. |
[8] | ZHANG Li-xin, SUI Yun-kang, DU Jia-zheng. Structural Crashworthiness Optimization Based on Response Surface Methodology[J]. Journal of Beijing University of Technology, 2007, 33(2): 129-133. |
[9] | YE Hong-ling, SUI Yun-kang, DU Jia-zheng, BIAN Bing-chuan. Optimal Topology Design of Truck Frame Structure With Stress Constraints[J]. Journal of Beijing University of Technology, 2006, 32(S1): 24-28. |
[10] | Gu Xueqi, Li Junqin. The Optimal Design and Strength Calculation of Cold Plate[J]. Journal of Beijing University of Technology, 1998, 24(1): 24-32. |