Citation: | HE Cun-fu, ZHANG Jun-jiao, SHEN Gong-tian, WU Zhan-wen, YUAN Jun. Acoustic Emission Characteristics of Rolling Bearings for Giant Wheel[J]. Journal of Beijing University of Technology, 2013, 39(5): 653-659. |
[1] |
钟秉林,黄仁.机械故障诊断学[M].北京:机械工业出版社,2007:47-55.
|
[2] |
韩捷,张瑞林.旋转机械故障机理及诊断技术[M].北京:机械工业出版社,1997:36-42.
|
[3] |
盛兆顺,尹琦岭.设备状态监测与故障诊断技术及应用[M].北京:化学工业出版社,2003:87-93.
|
[4] |
耿荣生,沈功田,刘时风.声发射信号处理和分析技术[J].无损检测,2002,24(1):23-28.GENG Rong-sheng,SHEN Gong-tian,LIU Shi-feng.Anoverview on the development of acoustic emission signalprocessing and analysis technique[J].NDT,2002,24(1):23-28.(in Chinese)
|
[5] |
郝如江,卢文秀,褚福磊.形态滤波在滚动轴承故障声发射信号处理中的应用[J].清华大学学报:自然科学版,2008,48(5):812-815.HAO Ru-jiang,LU Wen-xiu,CHU Fu-lei.Morphologyfilters for analyzing roller bearing fault using acousticemission signal processing[J].Journal of TsinghuaUniversity:Science and Technology,2008,48(5):812-815.(in Chinese)
|
[6] |
CHOUDHURY A,TANDON N.Application of acousticemission technique for the detection of defects in rollingelement bearings[J].Tribology International,2000,33(1):39-45.
|
[7] |
赵美云,李力,陈保家.滚动轴承故障声发射信号的小波包络谱分析[J].轴承,2008(4):38-41.ZHAO Mei-yun,LI Li,CHEN Bao-jia.Wavelet envelopespectrum analysis on acoustic emission signals of rollingbearing fault[J].Bearing,2008(4):38-41.(inChinese)
|
[8] |
PINEYRO J K,LEMPNOW A,LESCANO V.Effectiveness of new spectral tools in the anomaly detectionof rolling element bearings[J].Journal of Alloys andCompounds,2000,310(1/2):276-279.
|
[9] |
YOSHIOKA T,FUJIWARA T.A new acoustic emissionsource locating system for the study of rolling contactfatigue[J].Wear,1982,81(1):183-186.
|
[10] |
理华,徐春广,肖定国,等.滚动轴承声发射检测技术[J].轴承,2002(7):24-26.LI Hua,XU Chun-guang,XIAO Ding-guo,et al.Soundemission check technique for rolling bearing[J].Bearing,2002(7):24-26.(in Chinese)
|
[11] |
JAMALUDIN N,MBA D.Monitoring extremely slowrolling element bearings Part 1[J].NDT&EInternational,2002,35(6):349-358.
|
[12] |
于江林,余永增,戴光,等.滚动轴承声发射信号的人工神经网络识别技术[J].大庆石油学院学报,2008,32(5):64-66.YU Jiang-lin,YU Yong-zeng,DAI Guang,et al.Artificial neural network technology of AE signals ofrolling bearing[J].Journal of Daqing PetroleumInstitute,2008,32(5):64-66.(in Chinese)
|
[13] |
郝如江,卢文秀,褚福磊.滚动轴承故障信号的数学形态学提取方法[J].中国电机工程学报,2008,28(26):65-70.HAO Ru-jiang,LU Wen-xiu,CHU Fu-lei.Mathematicalmorphology extracting method on roller bearing faultsignals[J].Proceedings of the CSEE,2008,28(26):65-70.(in Chinese)
|
[14] |
张习加,李成群.声发射技术在铁路机车轮对轴承故障诊断中的应用[J].轴承,2007(6):25-27.ZHANG Xi-jia,LI Cheng-qun.The application ofacoustic emission in fault diagnosis of locomotive wheelset bearing[J].Bearing,2007(6):25-27.(inChinese)
|
[15] |
卢艳辉,尹泽勇.基于小波包分析方法的航空发动机滚动轴承故障诊断[J].燃气涡轮试验与研究,2005,18(1):35-44.LU Yan-hui,YIN Ze-yong.Fault diagnosis of aero-enginerolling-element bearing based on the wavelet packetanalysis[J].Gas Turbine Experiment and Research,2005,18(1):35-44.(in Chinese)
|
[16] |
张勇,刘俊宁.运用声发射技术检测DF4型机车通风机轴承故障[J].内燃机车,2004,367(9):24-27.ZHANG Yong,LIU Jun-ning.Adopting acoustic emissiontechnique to detect the failure of bearing of DF4locomotive ventilator[J].Diesel Locomotives,2004,367(9):24-27.(in Chinese)
|
[17] |
吴占稳,沈功田,袁俊,等.声发射技术在大型观览车主轴检测中的应用研究[J].无损检测,2011,33(5):39-42.WU Zhan-wen,SHEN Gong-tian,YUAN Jun,et al.Application of acoustic emission technique in detection ofgiant wheel main spindle[J].NDT,2011,33(5):39-42.(in Chinese)
|