Simulation of Orthogonal Face Gear Proceeding

WANG Zhi; SHI Zhao-yao; LIU Jian-wei; YANG Li-li

Journal of Beijing University of Technology > 2012 > 38(7): 1004-1007.

WANG Zhi, SHI Zhao-yao, LIU Jian-wei, YANG Li-li. Simulation of Orthogonal Face Gear Proceeding[J]. Journal of Beijing University of Technology, 2012, 38(7): 1004-1007.

Citation:

WANG Zhi, SHI Zhao-yao, LIU Jian-wei, YANG Li-li. Simulation of Orthogonal Face Gear Proceeding[J]. Journal of Beijing University of Technology, 2012, 38(7): 1004-1007.

Citation:

WANG Zhi, SHI Zhao-yao, LIU Jian-wei, YANG Li-li. Simulation of Orthogonal Face Gear Proceeding[J]. Journal of Beijing University of Technology, 2012, 38(7): 1004-1007.

PDF (525 KB)

Simulation of Orthogonal Face Gear Proceeding

1. College of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu, China;
2. College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China;
3. College of Mechanical Engineering, Huaiyin Institute of Technology, Huaian 223003, Jiangsu, China

More Information

Received Date: April 06, 2010
Available Online: December 02, 2022

Graphical Abstract

Abstract

Abstract

According to the gear meshing and the differential geometry theory,the tooth surface equation of orthogonal face gear is derived and the corresponding mathematical model of orthogonal shaft is founded.Computer simulation of shaping process of orthogonal face gear based on UG/Open GRIP of UG is achieved.A foundation to parametric design of involute gear cutter is provided.Shaping process of orthogonal face gear using involute gear cutter is simulated and the parametric model of face gear is generated.The process of machining face gear is shown.The radius of pointing was calculated by the approximate formula,and measured by the tool of UG.The feasibility of the method is demonstrated by comparing the two situations.
- face gear,
- shapping,
- simulation

FullText(HTML)

References (8)

References

[1]	朱如鹏.面齿轮传动的啮合特性研究[D].南京:南京航空航天大学机电学院,2000.ZHU Ru-peng.An investigation on the meshingcharacteristics of face gear drives[D].Nanjing:College ofMechanical and Electrical Engineering,Nanjing Universityof Aeronautics and Astronautics,2000.(in Chinese)
[2]	LITVIN F L,CHEN Y D,HEATH G F,et al.Apparatusfor precision grinding face gears:US,6146253[P].1997-10-30.
[3]	赵宁,郭辉,方宗德,等.用球形滚刀滚切面齿轮的理论误差[J].航空动力学报,2009,24(3):0677-0682.ZHAO Ning,GUO Hui,FANG Zong-de,et al.Theoryerror of cutting face gears with sphericity hob[J].Journalof Aerospace Power,2009,24(3):0677-0682.(inChinese)
[4]	付自平.正交面齿轮的插齿加工仿真和磨齿原理研究[M].南京:南京航空航天大学,2006:30-37.
[5]	王志,石照耀.面齿轮传动的特点及研究进展[J].工具技术,2009,43(10):10-14.WANG Zhi,SHI Zhao-yao.Characteristics of face geardrive and its research developments[J].Tool Engineering,2009,43(10):10-14.(in Chinese)
[6]	LITVIN F L.Gear geometry and applied theory[M].Cambridge:Cambridge University Press,2004:490-525.
[7]	黄勇,张博林,薛运锋.UG二次开发与数据库应用基础与典型范例[M].北京:电子工业出版社,2008:156-168.
[8]	蒲太平,唐进元.基于CATIAV5的圆柱齿轮虚拟加工研究[J].系统仿真学报,2008,20(6):4339-4343.PU Tai-ping,TANG Jin-yuan.Virtual machining processresearch of spur-gear based on CATIA V5[J].Journal ofSystem Simulation,2008,20(6):4339-4343.(inChinese)

Cited By

Get Citation

PDF

XML

Article views (12) PDF downloads (7)

Turn off MathJax

Article Contents

Abstract

References

Simulation of Orthogonal Face Gear Proceeding

Abstract

References

Catalog

Export File

Citation

Format

Content