• 综合性科技类中文核心期刊
    • 中国科技论文统计源期刊
    • 中国科学引文数据库来源期刊
    • 中国学术期刊文摘数据库(核心版)来源期刊
    • 中国学术期刊综合评价数据库来源期刊
LIU Zhao-miao, WANG Xiu-li, YU Hai-yuan, MA Zhong-fang, SUI Yun-kang. The Status and Development of High Temperature Air Combustion Technology in China[J]. Journal of Beijing University of Technology, 2006, 32(7): 614-621. DOI: 10.3969/j.issn.0254-0037.2006.07.009
Citation: LIU Zhao-miao, WANG Xiu-li, YU Hai-yuan, MA Zhong-fang, SUI Yun-kang. The Status and Development of High Temperature Air Combustion Technology in China[J]. Journal of Beijing University of Technology, 2006, 32(7): 614-621. DOI: 10.3969/j.issn.0254-0037.2006.07.009

The Status and Development of High Temperature Air Combustion Technology in China

More Information
  • Received Date: March 22, 2005
  • Available Online: December 29, 2022
  • From aspects of generator design, configuration of switch valve, switch time, shape of burner, exhaust of NOx and reaction mechanism etc., this paper has summarized the development of high temperature, especially with a strong focus on the status and development of HIAC in China. It pect of High Temperature Air Combustion technology. Research and application of fit to energy saving and reducing the exhaust of pollution of thermal equipment indushaust of NOx and reacti air combustion(HTAC) has expounded the pros HTAC have great benef try.
  • [1]
    TSUJI H,GUPTA A K,HASEGAWA T,et al.High temperature air combustion:from energy conservation to pollution reduction[M].New York:CRC Press,2003.
    [2]
    BAUKAI C E,Jr,GERSHTEIN Y Y,LI Xian-ming.Computational fluid dynamics in industrial combustion[M].New York:CRC Press,2001.
    [3]
    BLASIAK W,YANG W H,RAFIDI N.Physical properties of a LPG flame with high-temperature air on a regenerative burner[J].Combustion and Flame,2004,136(4):67-569.
    [4]
    YANG W,BLASIAK W.Chemical flame length and volume in LPG combustion using high-temperature and low oxygen concentration oxidizer[J].Energy and Fuels,2004,18:1329-1335.
    [5]
    YANG W,BLASIAK W.Combustion performance and numerical simulation of a high temperature air-LPG flame on a regenerative burner[J].Scandinavian Journal of Metallurgy,2004,33(2):113-120.
    [6]
    LILLE S,BLASIAK W,JEWARTOWSKI M.Experimental study of the fuel jet combustion in high temperature and low oxygen content exhaust gases[J].Energy,2005,30:2-4.
    [7]
    FRIBERG R,BLASIAK W.Measurements of mass flux and stoichiometry of conversion gas from three different wood fuels as function of volume flux of primary air in packed-bed combustion[J].Biomass and Bioenergy,2002,23(3):189-208.
    [8]
    王璋保.节能--我国能源可持续发展的重要组成部分[J].工业加热,2001(2):1-5.WANG Zhang-bao.Energy-saving:the important part of energy source sustainable development in china[J].Industrial Heating,2001(2):1-5.(in Chinese)
    [9]
    曾令可,张海文,王慧,等.陶瓷窑炉的污染与新型燃烧技术及设备的发展[J].工业炉,2002,24(2):14-17.ZENG Ling-ke,ZHANG Hai-wen,WANG Hui,et al.Pollution of ceramic kiln and development of new combustion technique and equipment[J].Industrial Furnace,2002,24(2):14-17.(in Chinese)
    [10]
    唐黔,卢先德,王树海,等.工业炉窑烟气污染及其治理(上)[J].工业炉,1995(4):42.TANG Qian,LU Xian-de,WANG Shu-hai,et al.Waste smoke pollution and the treatment of industrial furnaces and stoves (Part Ⅰ)[J].Industrial Furnace,1995 (4):42.(in Chinese)
    [11]
    周孑民,萧泽强,杨卫宏,等.高温空气资源的开发与应用[J].冶金能源,2000,19(4):40-44.ZHOU Jie-min,XIAO Ze-qiang,YANG Wei-hong,et al.Development and application of high-temperature air resource[J].Energy for Metallurgical Industry,2000,19(4):40-44.(in Chinese)
    [12]
    徐旭常,由长福,李宇红,等.高温空气燃烧技术的国际发展动态[J].工业加热,2003,32(1):1-7.XU Xu-chang,YOU Chang-fu,LI Yu-hong,et al.Recent development of high temperature air combustion technology in the world[J].Industrial Heating,2003,32(1):1-7.(in Chinese)
    [13]
    NISHIMURA M,SUZUKI T,NAKANISHI R,et al.Low-NOx combustion under high preheated air temperature condition in an industrial furnace[J].Energy Conversion and Management,1997,38(10):1353-1363.
    [14]
    OHKUBO Y,IDOTA Y,NOMURA Y.Evaporation characteristics of fuel spray and low emissions in a lean premixed-prevaporization combustor for a 100 kW automotive ceramic gas turbine[J].Energy Conversion and Management,1997,38(10):1297-1309.
    [15]
    GUPTA A K,LEWIS M,DAUER M.Swirl effects on combustion characteristics of premixed flames[J].ASME J of Engineering for Gas Turbines and Power,2001,123(3):619-626.
    [16]
    祁海鹰,李宇红,由长福,等.高温低氧燃烧条件下氮氧化物的生成特性[J].燃烧科学与技术,2002,8(1):17-22.QI Hai-ying,LI Yu-hong,YOU Chang-fu,et al.Emission on NOx in high temperature combustion with low oxygen concentration[J].Journal of Combustion Science and Technology,2002,8 (1):17-22.(in Chinese)
    [17]
    李宇红,祁海鹰,张宏武.甲烷预混燃烧火焰的详细数值模拟[J].工程热物理学报,2002,23(1):119-122.LI Yu-hong,QI Hai-ying,ZHANG Hong-wu.Numerical simulation of pre-mixed flame of methane[J].Journal of Engineering Thermophysics,2002,23(1):119-122.(in Chinese)
    [18]
    代朝红,温治,朱宏祥,等.高温空气燃烧技术的研究现状及发展趋势[J].工业加热,2002(4):11-15.DAI Chao-hong,WEN Zhi,ZHU Hong-xiang,et al.Research status and development trend of high temperature air combustion technology[J].Industrial Heating,2002(4):11-15.(in Chinese)
    [19]
    张汝淼.热处理燃料炉的现状与展望[J].工业炉,2000,22(4):15-18.ZHANG Ru-miao.Present status and prospect of fuel fired furnace for the thermal treatment[J].Industrial Furnace,2000,22(4):15-18.(in Chinese)
    [20]
    朱敏之.日本高性能工业炉的开发战略和实施进展[J].工业加热,2001(1):10-13.ZHU Min-zhi.Development strategy and implementation of Japanese high performance industrial furnaces[J].Industrial Heating,2001(1):10-13.(in Chinese)
    [21]
    张先卓,尹丹模.高温低氧燃烧方法的应用初探(一)[J].工业炉,2002(1):13-17.ZHANG Xian-zhuo,YIN Dan-mo.Pilot study for application of high temperature low oxygen combustion (Ⅰ)[J].Industrial Furnace,2002(1):13-17.(in Chinese)
    [22]
    郭伯伟,张者一.工业炉发展与蓄热式燃烧器的应用[J].工业加热,2002(3):4-9.GUO Bo-wei,ZHANG Zhe-yi.The development of industrial furnaces and the application of regenerative burner[J].Industrial Heating,2002(3):4-9.(in Chinese)
    [23]
    武立云,刘立群,赵淑珍,等.减少燃气工业炉NOx污染的技术和实践[J].工业加热,1999(4):5-8.WU Li-yun,LIU Li-qun,ZHAO Shu-zhen,et al.Reduction of NOx pollution from gas-fired industrial furnace[J].Industrial Heating,1999(4):5-8.(in Chinese)
    [24]
    武立云,杨永军,薛海涛.陶瓷烧成窑炉燃烧技术的发展[C]//2000年全国工业炉暨电热学术会议.天津:工业炉出版社,2000:33-37.

    WU Li-yun,YANG Yong-jun,XUE Hai-tao.Development of combustion technology on cremation kiln[C]// 2000 National electrical and thermal academic conference on industrial furnace.Tianjin:Industrial Furnace Publishing Company,2000:33-37.
    [25]
    徐华,武立云,马重芳.进一步提高高温空气燃烧余热回收率[J].工业加热,2002(3):1-4.XU Hua,WU Li-yun,MA Chong-fang.Research on increasing recovery rate of the waste heat further in HTAC[J].Industrial Heating,2002(3):1-4.(in Chinese)
    [26]
    刘赵淼,马重芳,王亲猛,等.逆向式高温蓄热空气燃烧过程的数值研究[J].工业炉,2002,24(2):1-4.LIU Zhao-miao,MA Chong-fang,WANG Qin-meng,et al.Numerical analysis of high temperature air combustion of retrorse regenerative burner[J].Industrial Furnace,2002,24(2):1-4.(in Chinese)
    [27]
    饶文涛,杜军,张鹤声,等.蓄热燃烧机理的实验及数值模拟研究[J].工业加热,2001(5):4-6,11.RAO Wen-tao,DU Jun,ZHANG He-sheng,et al.Study on the experiment and numerical simulation of regenerative combustion mechanism[J].Industrial Heating,2001(5):4-6.(in Chinese)
    [28]
    李东,于宏,姚恩东,等.HTAC实用技术的发展与应用比较[C]//2000年全国工业炉暨电热学术会议论文集.天津:工业炉出版社,2000:87-92.LI Dong,YU Hong,YAO En-dong,et al.Development and application of HTAC technique[C]//2000 National electrical and thermal academic conference on industrial furnace.Tianjin:Industrial Furnace Publishing Company,2000:87-92.(in Chinese)
    [29]
    侯长连,胡和平,董为民,等.我国高效蓄热式工业炉的现状及其发展[C]//2000年全国工业炉暨电热学术会议.天津:工业炉出版社,2000:78-83.HOU Chang-lian,HU He-ping,DONG Wei-min,et al.Present status and prospect of high efficiency regenerative furnace in China[C]//2000 National electrical and thermal academic conference on industrial furnace.Tianjin:Industrial Furnace Publishing Company,2000:78-83.(in Chinese)
    [30]
    刘日新,刘广林.蓄热燃烧技术及其在冶金工业炉中的应用[J].工业炉,2000,22(2):29-32.LIU Ri-xin,LIU Guang-lin.Regenerative ceramic burner and its application in metallurgical furnace[J].Industrial Furnace,2000,22(2):29-32.(in Chinese)
    [31]
    欧俭平,吴道洪,萧泽强.蜂窝型蓄热室传热过程的数值模拟及热工特性[C/OL]//北京神雾热能技术有限公司研究论文精选.[2004-10-05]http://www.shenwu.com.cn/lunwenjingxuan.htm. OU Jian-ping,WU Dao-hong,XIAO Ze-qiang.Numerical simulation of heat transfer process and thermal performance of honeycomb regenerator[C/OL]//Proceedings of Beijing Shenwu Thermal Energy Technology Co.Ltd.[2004-10-05].http://www.shenwu.com.cn/lunwenjingxuan.htm. (in Chinese)
    [32]
    谢善清,吴道洪.高温空气燃烧技术的研究与应用[C/OL]//北京神雾热能技术有限公司研究论文精选[2004-10-05].http://www.shenwu.com.cn/lunwenjingxuan.htm. XIE Shan-qing,WU Dao-hong.Study and Application of high temperature air combustion[C/OL]//Proceedings of Beijing Shenwu thermal energy technology Co.Ltd.[2004-10-05].http://www.shenwu.com.cn/lunwenjingxuan.htm.(in Chinese)
    [33]
    吴光亮,朱荣,李士琦,等.高温低氧空气燃烧(HTAC)技术在我国冶金炉窑中的应用[J].工业加热,2002(4):6-10.WU Guang-liang,ZHU Rong,LI Shi-qi,et al.Application of the high temperature air combustion in chinese metallurgical furnaces[J].Industrial Heating,2002(4):6-10.(in Chinese)
    [34]
    杜军,饶文涛,李朝祥,等.陶瓷蓄热体阻力特性的实验研究[J].工业炉,2002,24(1):6-9.DU Jun,RAO Wen-tao,LI Chao-xiang,et al.Experimental research of resistance feature of ceramic regenerator[J].Industrial Furnace,2002,24(1):6-9.(in Chinese)
    [35]
    蒋绍坚,彭好义,汪洋洋,等.高温低氧空气燃烧火焰观察实验研究[J].冶金能源,2000,19(3):14-18,42.JIANG Shao-jian,PENG Hao-yi,WANG Yang-yang,et al.Experimental research on flames in condition of high temperature and low oxygen air combustion[J].Metallurgy Energy,2000,19(3):14-18,42.(in Chinese)
    [36]
    YANG W,BLASIAK W.Numerical study of fuel temperature influence on single gas jet combustion in highly preheated and oxygen deficient air[J].Energy,2005,30(2/4):385-398.
    [37]
    李伟,祁海鹰,李宇红,等.蜂窝陶瓷体的稳态传热特性和最佳换向时间[C]//2000年全国工业炉暨电热学术会议.天津:工业炉出版社,2000:366-372.LI Wei,QI Hai-ying,LI Yu-hong,et al.Steady heat conducting personality and optimal switch time of honeycomb ceramic[C]//2000 National electrical and thermal academic conference on industrial furnace.Tianjin:Industrial Furnace publishing Company,2000:366-372.(in Chinese)
    [38]
    蒋绍坚,彭好义,艾元方,等.高温低氧气氛中气体燃烧的火焰特性[J].中南工业大学学报,2000,31(3):228-231.JIANG Shao-jian,PENG Hao-yi,AI Yuan-fang,et al.Flame characteristics of gas fuel in condition of high preheated temperature and low oxygen concentration[J].Journal of Central South University of Technology,2000,31(3):228-231.(in Chinese)
    [39]
    HAO Hai-zhou,LIU Zhao-miao,SUI Yun-kang,et al.Influence of radiation on the temperature in HTAC[M] //HUANG Ping,WANG Ya-jun,LI Sheng-cai,et al.Progress in Safety Science and Technology.Beijing:Science Press,2005:1252-1257.
    [40]
    LIU Zhao-miao,YU Hai-yuan,WANG Xiu-li,et al.Numerical analysis of HTAC system with different gas inlet direction[M]//LI Sheng-cai,WANG Ya-jun,HUANG Ping.Progress in Safety Science and Technology.Beijing:Science Press,2004:3029-3033.
    [41]
    彭红喜,薛平智,牛晓宇,等.高炉煤气在加热炉上的应用[J].工业炉,2001,23(3):31-32.PENG Hong-xi,XUE Ping-zhi,NIU Xiao-yu,et al.Blast furnace gas using in heating furnace[J].Industrial Furnace,2001,23(3):31-32.(in Chinese)
    [42]
    严承沛,樊东黎.高温空气燃烧技术在天然气热处理技术设备上的应用探讨[J].工业炉,2001,23(2):15-20.YAN Cheng-pei,FAN Dong-li.Reseach and development search for high temperature air combustion technology and natural gas energy resources fired-gas heat treatment technology and equipment[J].Industrial Furnace,2001,23(2):15-20.(in Chinese)
  • Related Articles

    [1]WANG Xiao, PANG Yong, XIE Rong-rong, WANG Xue, WU Da-gang. Total Amount Control in Tuwei River Basin Under the Control of Characteristic Parameters of Pollution Zone[J]. Journal of Beijing University of Technology, 2015, 41(7): 1098-1107. DOI: 10.11936/bjutxb2014090004
    [2]CHEN Yuan, GUO Xiu-rui, CHENG Shui-yuan, WANG Zheng, QIN Cui-hong, LU Jin, GAO Ji-jun, HUANG Qing. Pollutant Source Analysis and Identification of Prior Control Areas in Three Gorges Reservoir Based on SWAT Model[J]. Journal of Beijing University of Technology, 2013, 39(5): 761-768. DOI: 10.3969/j.issn.0254-0037.2013.05.020
    [3]HAO Wan-jun, ZHAO Xiao-liang, CHEN Jian-jian, ZHANG Yue-fang, ZHOU Sheng-bin. Preparation of λ/4 Type Absorber of Flyash in S-band for the EM-pollute Protection[J]. Journal of Beijing University of Technology, 2009, 35(10): 1402-1406. DOI: 10.3969/j.issn.0254-0037.2009.10.018
    [4]MA Min-tao, HAN Song, GUO Jin, QIN Xia. The Speedy Extract and Contrasting Analysis of the Major Pollution Control Factors in Different Regions[J]. Journal of Beijing University of Technology, 2009, 35(3): 369-373. DOI: 10.3969/j.issn.0254-0037.2009.03.015
    [5]ZHAO Xiu-yong, CHENG Shui-yuan, TIAN Gang, LI Gang, GUO Xiu-rui, WANG Hai-yan. Construction Fugitive Dust Pollution and Control in Beijing[J]. Journal of Beijing University of Technology, 2007, 33(10): 1086-1090. DOI: 10.3969/j.issn.0254-0037.2007.10.016
    [6]MA Min-tao, HAO Li. Factor Analysis and Management of Pollutant Source in City[J]. Journal of Beijing University of Technology, 2007, 33(1): 67-71. DOI: 10.3969/j.issn.0254-0037.2007.01.014
    [7]LIU Zhao-miao, YU Hai-yuan, JIN Yan-mei, YE Hong-ling. Dynamic Analysis on Commutation of Regenerative High Temperature Air Combustion With Reverse Direction[J]. Journal of Beijing University of Technology, 2006, 32(S1): 107-112. DOI: 10.3969/j.issn.0254-0037.2006.S1.021
    [8]LÜ Jian, HUO Shou-liang, JING Yi-feng, CHENG Jing, ZHANG Yan. Research on Pollutant Diffusion Control of Contaminated Dredged Material on the Mud Dumping Site[J]. Journal of Beijing University of Technology, 2006, 32(3): 229-234. DOI: 10.3969/j.issn.0254-0037.2006.03.008
    [9]Zheng Jingying, Zhong Rugang, Li Peiheng, Fang Fang, Zheng Dawei, Zhen Yan, Dai Qianhuan. A Research on Indoor Air Pollution from Combustion of Cooking Stoves in Domestic Houses of Beijing[J]. Journal of Beijing University of Technology, 1996, 22(2): 34-39.
    [10]Liu Baozhi, Chen Yeqin, Yi Zeguang. Methodology of Establishing Urban Integrated Pollution Control and Treatment Index System[J]. Journal of Beijing University of Technology, 1988, 14(4): 28-36.

Catalog

    Article views (11) PDF downloads (7) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return