- 综合性科技类中文核心期刊
- 中国科技论文统计源期刊
- 中国科学引文数据库来源期刊
- 中国学术期刊文摘数据库（核心版）来源期刊
- 中国学术期刊综合评价数据库来源期刊
| Citation: |
XIE Zhitian, NIU Xiaokai, LI Pengfei, ZHANG Mingju, LIU Xiao, SONG Wei. Study on Mechanical Properties of Disconnectable Coupling Joint With Steel Wedges (DCJS) Under Eccentric Load[J]. Journal of Beijing University of Technology, 2025, 51(1): 59-71. DOI: 10.11936/bjutxb2023080004
|
To quantitatively study the flexural performance of the disconnectable coupling joint with steel wedges (DCJS), the validated finite element model was established based on the test results of the DCJSs. Subsequently a series of finite element models were used to systematically study the deformation and force mechanism of the DCJS under eccentric load. The flexural performance of the DCJDs was analyzed through the parameterization method. Based on the outcomes of the parametric study, the moment-rotation model was established for DCJS. Results show that the flexural performance of the DCJS decreases with the increase of eccentricity, wedge height and midrib height, and increases with the increase of wedge length, wedge width, channel thickness and tube wall thickness. Meanwhile, the moment-angle curve, initial flexural stiffness and plastic flexural capacity of the DCJS can be accurately predicted by the moment-rotation model.
| [1] |
ZHANG M J, XIE Z T, LI P F. Bearing capacity and failure behavior of disconnectable coupling joint with double row wedges (DCJD) used in the prestressed internal bracing[J]. Underground Space, 2022, 7(4): 498-513. doi: 10.1016/j.undsp.2021.11.003
|
| [2] |
ZHANG M J, XIE Z T, LI P F. Experimental and numerical investigation on the bearing capacity of disconnectable coupling (DC) joints for prestressed internal bracing in subway excavations[J/OL]. Tunnelling and Underground Space Technology, 2020, 104: 103501[2020-6-12]. https://doi.org/10.1016/j.istruc.2024.106830
.
|
| [3] |
张明聚, 谢治天, 刘耀轩, 等. 基坑工程钢楔式活络端力学性能试验研究[J]. 北京工业大学学报, 2019, 45(12): 1223-1231. doi: 10.11936/bjutxb2018030010
ZHANG M J, XIE Z T, LIU Y X, et al. Experimental study on the mechanical properties of steel wedge active node in braced excavation engineering[J]. Journal of Beijing University of Technology, 2019, 45(12): 1223-1231. (in Chinese) doi: 10.11936/bjutxb2018030010
|
| [4] |
熊栋栋, 杨钊, 廖正根. 地铁深基坑钢支撑预加轴力分析[J]. 地下空间与工程学报, 2018, 14(4): 1049-1055.
XIONG D D, YANG Z, LIAO Z G. Analysis on pre axial force of steel support in deep foundation pit of subway[J]. Chinese Journal of Underground Space and Engineering, 2018, 14(4): 1049-1055. (in Chinese)
|
| [5] |
孙九春, 白廷辉. 地铁基坑钢支撑系统活络头承载力研究[J]. 施工技术, 2020, 49(2): 119-125.
SUN J C, BAI T H. Research on the bearing capacity of the flexible head of the steel support system of the subway foundation excavation[J]. Construction Technology, 2020, 49(2): 119-125. (in Chinese)
|
| [6] |
张明聚, 谢治天, 李鹏飞, 等. 基于有限元分析的基坑工程钢支撑活络端偏心受压性能研究[J]. 土木工程学报, 2021, 54(10): 106-116.
ZHANG M J, XIE Z T, LI P F, et al. Numerical studies on eccentric compression performance of disconnectable coupling joint in foundation pit project[J]. China Civil Engineering Journal, 2021, 54(10): 106-116. (in Chinese)
|
| [7] |
苑媛. 基坑工程钢支撑BFW活络端的力学性能和设计方法[D]. 北京: 北京工业大学, 2017: 16-29.
YUAN Y. Mechanical properties and design method of BFW loose end of steel support in foundation pit engineering[D]. Beijing: Beijing University of Technology, 2017: 16-29. (in Chinese)
|
| [8] |
张明聚, 苑媛, 王锡军. 基坑工程钢支撑BFW活络端在偏心荷载作用下的力学性能[J]. 北京工业大学学报, 2018, 44(2): 251-258. doi: 10.11936/bjutxb2017050022
ZHANG M J, YUAN Y, WANG X J. Mechanical properties of BFW active node of steel strut under eccentric load in excavation engineering[J]. Journal of Beijing University of Technology, 2018, 44(2): 251-258. (in Chinese) doi: 10.11936/bjutxb2017050022
|
| [9] |
LUI E M, CHEN W F. Analysis and behaviour of flexibly-jointed frames[J]. Engineering Structures, 1986, 8(2): 107-118.
|
| [10] |
WU F H, CHEN W F. A design model for semi-rigid connections[J]. Engineering Structures, 1990, 12(2): 88-97.
|
| [11] |
ANG K M, MORRIS G A. Analysis of three-dimensional frames with flexible beam-column connections[J]. Canadian Journal of Civil Engineering, 1984, 11(2): 245-254.
|
| [12] |
施刚, 石永久, 王元清. 钢结构梁柱半刚性端板连接弯矩-转角全曲线计算方法[J]. 工程力学, 2006, 23(5): 67-73, 55.
SHI G, SHI Y J, WANG Y Q. Calculation method on moment-rotation curves of beam-to-column semirigid end-plate connections[J]. Engineering Mechanics, 2006, 23(5): 67-73, 55. (in Chinese)
|
| [13] |
GUO X N, HUANG Z W, XIONG Z, et al. Numerical studies on behaviour of bolted ball-cylinder joint under axial force[J]. Steel and Composite Structures, 2016, 20(6): 1323-1343.
|
| [14] |
田芳, 刘财喜, 刘芳, 等. Q235钢真实应力-应变曲线研究[J]. 中南林业科技大学学报, 2011, 31(4): 182-186.
TIAN F, LIU C X, LIU F, et al. Research on the true stress-strain curves of Q235 steel[J]. Journal of Central South University of Forestry & Technology, 2011, 31(4): 182-186. (in Chinese)
|
| [15] |
European Convention for Constructional Steelwork. Recommended testing procedure for assessing the behaviour of structural steel elements under cyclic loads[S]. Brussels: ECCS, 1986.
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: