Applicability Investigation of Self-piercing Rivet Used in the Prefabricated Light Steel Structure

SONG Linlin; YAN Weiming; ZHANG Xueming; XIE Zhiqiang; TAN Qinghao

doi:10.11936/bjutxb2018080009

Journal of Beijing University of Technology > 2020 > 46(1): 33-41. > DOI: 10.11936/bjutxb2018080009

SONG Linlin, YAN Weiming, ZHANG Xueming, XIE Zhiqiang, TAN Qinghao. Applicability Investigation of Self-piercing Rivet Used in the Prefabricated Light Steel Structure[J]. Journal of Beijing University of Technology, 2020, 46(1): 33-41. DOI: 10.11936/bjutxb2018080009

Citation:

PDF (6166 KB)

Applicability Investigation of Self-piercing Rivet Used in the Prefabricated Light Steel Structure

Beijing Key Laboratory of Earthquake Engineering and Structural Retrofit, Beijing University of Technology, Beijing 100124, China

More Information

Received Date: August 13, 2018
Available Online: August 03, 2022
Published Date: January 09, 2020

Graphical Abstract

Abstract

Abstract

To solve the problems of many self-drilling screw connection procedures and low efficiency in traditional assembly structure, lock-riveting connection was introduced in this paper. To investigate the feasibility of the self-piercing rivet (SPR)used in the prefabricated light steel structure, single joint and truss beam specimens were manufactured by self-tapping screw and locking-riveting, respectively. The failure modes, bending capacity, stiffness and ductility of the two kinds of connection specimens were compared and analyzed based on the performance of truss beam with the self-tapping screw. Results show that the stress characteristics of lock rivet in truss beam and joint test are different. The conclusion of single joint test is not enough to explain the applicability of lock rivet joint in the whole structure. The failure mode of the truss beam with lock-riveted connection is ductile failure. The upper chord flange plate is cracked. The bending capacity, stiffness and ductility are better than those of the self-tapping screw connection, and the bending stiffness has obvious advantages. The lock riveting connection is suitable for modular cold formed thin-walled steel modularization with high stiffness requirements.
- self-piercing riveted connection,
- prefabricated,
- light steel structure,
- mechanical properties

FullText(HTML)

References (21)

References

[1]	侯兆欣, 吕健, 王宇红, 等.自攻螺钉连接在建筑上的应用[J].工业建筑, 1999(9):52-54. http://d.old.wanfangdata.com.cn/Periodical/gyjz199909012 HOU Z X, LÜ J, WANG Y H, et al. Application of self-drilling screws for metal roofing & cladding[J]. Industrial Construction, 1999(9):52-54. (in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gyjz199909012
[2]	LAKKAVALLI B S, LIU Y. Experimental study of composite cold-formed steel C-section floor joists[J]. Journal of Constructional Steel Research, 2006, 62(10):995-1006. doi: 10.1016/j.jcsr.2006.02.003
[3]	高宛成, 肖岩.冷弯薄壁型钢组合墙体受剪性能研究综述[J].建筑结构学报, 2014, 35(4):30-40. http://d.old.wanfangdata.com.cn/Periodical/jzjgxb201404004 GAO W C, XIAO Y. Literature review of shear performance of cold formed thin-walled steel composite walls[J]. Journal of Building Structures, 2014, 35(4):30-40. (in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jzjgxb201404004
[4]	邢保英.自冲铆连接机理及力学性能研究[D].昆明: 昆明理工大学, 2014. http://cdmd.cnki.com.cn/Article/CDMD-10674-1014356435.htm XING B Y. Investigation of forming mechanism and mechanical property of self-piercing riveted joints[D]. Kunming: Kunming University of Science and Technology, 2014. (in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10674-1014356435.htm
[5]	HE X, PEARSON I, YOUNG K. Self-pierce riveting for sheet materials:state of the art[J]. Journal of Materials Processing Technology, 2008, 199(1):27-36. doi: 10.1016-j.jmatprotec.2007.10.071/
[6]	LENNON R, PEDRESCHI R, SINHA B P. Comparative study of some mechanical connections in cold formed steel[J]. Construction and Building Materials, 1999, 13(3):109-116. doi: 10.1016/S0950-0618(99)00018-5
[7]	MUCHA J, WITKOWSKI W. The experimental analysis of the double joint type change effect on the joint destruction process in uniaxial shearing test[J]. Thin-Walled Structures, 2013, 66(Suppl C):39-49. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=c838331ff1e113cbca3abe28877551f9
[8]	PORCARO R, HANSSEN A G, LANGSETH M, et al. The behaviour of a self-piercing riveted connection under quasi-static loading conditions[J]. International Journal of Solids and Structures, 2006, 43(17):5110-5131. doi: 10.1016/j.ijsolstr.2005.10.006
[9]	PORCARO R, HANSSEN A G, LANGSETH M, et al. Self-piercing riveting process:an experimental and numerical investigation[J]. Journal of Materials Processing Technology, 2006, 171(1):10-20. http://d.old.wanfangdata.com.cn/NSTLQK/NSTL_QKJJ028595818/
[10]	CALABRESE L, BONACCORSI L, PROVERBIO E, et al. Durahility on alternate immersion test of self-piercing riveting aluminium joint[J]. Materials & Design, 2013, 46:849-856. http://www.sciencedirect.com/science/article/pii/S0261306912007741
[11]	YAN W, XIE Z, YU C, et al. Experimental investigation and design method for the shear strength of self-piercing rivet connections in thin-walled steel structures[J]. Journal of Constructional Steel Research, 2017, 133:231-240. doi: 10.1016/j.jcsr.2017.02.022
[12]	谢志强, 闫维明, 慕婷婷, 等.锁铆连接在模块化装配式冷弯薄壁型钢结构中应用可行性研究[J].北京工业大学学报, 2018, 44(1):104-111. doi: 10.11936/bjutxb2017030028 XIE Z Q, YAN W M, MU T T, et al. Feasibility research on self-piercing rivet connections used in structure prefabricated modularly with cold-formed thin-walled steel[J]. Journal of Beijing University of Technology, 2018, 44(1):104-111. (in Chinese) doi: 10.11936/bjutxb2017030028
[13]	闫维明, 谢志强, 宋林琳, 等.冷弯薄壁型钢锁铆连接力学性能及其本构模型研究[J].工程力学, 2017, 34(8):133-143. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gclx201708015 YAN W M, XIE Z Q, SONG L L, et al. Study of the mechanical property of self-piercing rivet and its constitutive model in cold-formed thin-walled steel[J]. Engineering Mechanics, 2017, 34(8):133-143. (in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gclx201708015
[14]	闫维明, 慕婷婷, 谢志强, 等.装配式冷弯薄壁型钢结构中4种连接的抗剪性能试验研究[J].北京工业大学学报, 2018, 44(8):1099-1108. doi: 10.11936/bjutxb2017090034 YAN W M, MU T T, XIE Z Q, et al. Experimental study on shear behavior of four connections in fabricated cold-formed steel structures[J]. Journal of Beijing University of Technology, 2018, 44(8):1099-1108. (in Chinese) doi: 10.11936/bjutxb2017090034
[15]	WOOD J V, DAWE J L. Full-scale test behavior of cold-formed steel roof trusses[J]. Journal of Structural Engineering-ASCE, 2006, 132(4):616-623. doi: 10.1061/(ASCE)0733-9445(2006)132:4(616)
[16]	BONDOK D H, SALIM H A. Failure capacity of cold-formed steel roof trusses end-connections[J]. Thin-Walled Structures, 2017, 121:57-66. doi: 10.1016/j.tws.2017.09.026
[17]	DAWE J L, WOOD J V. Small-scale test behavior of cold-formed steel roof trusses[J]. Journal of Structural Engineering-ASCE, 2006, 132(4):608-615. doi: 10.1061/(ASCE)0733-9445(2006)132:4(608)
[18]	林丽.冷弯薄壁型钢桁架结构力学性能分析与设计[D].西安: 长安大学, 2011. http://cdmd.cnki.com.cn/Article/CDMD-11941-1011186671.htm LIN L. Research on mechanical behavior and design method of cold-formed steel trusses[D]. Xi'an: Chang'an University, 2011. (in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-11941-1011186671.htm
[19]	中国钢铁工业协会.金属材料-拉伸试验第1部分: 室温试验方法GB/T 228.1-2010[S].北京: 中国标准出版社, 2010: 10-32.
[20]	中国建筑科学研究院.建筑抗震试验方法规程JGJ/T101-2015[S].北京: 建筑工业出版社, 2015: 50-60.
[21]	ABAQUS. ABAQUS/Standard User's Mannual, version 6.14-2 EF1[M]. Pawtucket, RI:Hibbitt, Carlsson and Sorensen, Inc., 2018.

[1]	YE Hongling, WANG Xiuhua, WANG Weiwei, WANG Zhenqi. Mechanical Properties Analysis and Optimization Design for Bistable Hybrid Composite Shells[J]. Journal of Beijing University of Technology, 2022, 48(11): 1113-1121. DOI: 10.11936/bjutxb2021040028
[2]	YE Hongling, WANG Zhenqi, WANG Xiuhua. Quasi-static Compression Mechanical Properties Analysis and Optimization Design for Origami-based Meta-structure[J]. Journal of Beijing University of Technology, 2022, 48(2): 105-113. DOI: 10.11936/bjutxb2020110037
[3]	YE Hongling, SHI Xuesong, ZHANG Yang. Analysis of Mechanical Properties of Tape-spring With Viscoelastic Effects[J]. Journal of Beijing University of Technology, 2019, 45(3): 275-282. DOI: 10.11936/bjutxb2017110033
[4]	SHU Xingwang. Mechanical Properties and Pavement Performance of Modified Epoxy Concrete With High Content of Waste Rubber[J]. Journal of Beijing University of Technology, 2018, 44(10): 1314-1320. DOI: 10.11936/bjutxb2017050028
[5]	LI Yue, ZHU Jincai, WU Yusheng, YU Pengchao. Research of Mechanics Properties of PVA Fiber Cementitions Composites[J]. Journal of Beijing University of Technology, 2018, 44(4): 553-560. DOI: 10.11936/bjutxb2017010009
[6]	ZHANG Mingju, YUAN Yuan, WANG Xijun. Mechanical Properties of BFW Active Node of Steel Strut Under Eccentric Load in Excavation Engineering[J]. Journal of Beijing University of Technology, 2018, 44(2): 251-258. DOI: 10.11936/bjutxb2017050022
[7]	YANG Qingsheng, SHANG Junjun, LIU Xia. Coarse-grained Molecular Dynamics Model and Mechanical Properties of Multi-layer Graphene[J]. Journal of Beijing University of Technology, 2016, 42(12): 1798-1804. DOI: 10.11936/bjutxb2016080021
[8]	GUO Shi-jun, YANG Qing-sheng. 3D Carbon Nanotube-based Nanostructure and Prediction of Its Mechanical Properties[J]. Journal of Beijing University of Technology, 2015, 41(1): 25-31. DOI: 10.11936/bjutxb2014010004
[9]	SONG Xiao-ruan, GAO Jian-ling, QU Jun-yi. Experimental Study on Physical and Mechanical Properties of GRC Formwork[J]. Journal of Beijing University of Technology, 2008, 34(7): 708-713. DOI: 10.3969/j.issn.0254-0037.2008.07.007
[10]	BAI Yin, SHI Yong-jiu, WANG Yuan-qing. Analysis on Global Mechanical Properties of Portal Frame Steel Structures[J]. Journal of Beijing University of Technology, 2007, 33(5): 537-541. DOI: 10.3969/j.issn.0254-0037.2007.05.017

Cited By

Cited by

Periodical cited type(1)

莫禹凡，潘志宏. 新型轻钢铆接桁架组合楼板试验研究. 科学技术与工程. 2023(20): 8763-8770 .

Other cited types(2)

Get Citation

PDF

XML

Article views (154) PDF downloads (80) Cited by(3)

Turn off MathJax

Article Contents

Abstract

References

Applicability Investigation of Self-piercing Rivet Used in the Prefabricated Light Steel Structure