- 综合性科技类中文核心期刊
- 中国科技论文统计源期刊
- 中国科学引文数据库来源期刊
- 中国学术期刊文摘数据库（核心版）来源期刊
- 中国学术期刊综合评价数据库来源期刊
| Citation: |
ZHANG Aiping, LIU Xi, LIU Zhifeng, SHI Zheng, HE Fangxin. Manufacture of Customized Orthosis in Adolescent Idiopathic Scoliosis and Comfort Evaluation Based on 3D Printing[J]. Journal of Beijing University of Technology, 2017, 43(4): 518-525. DOI: 10.11936/bjutxb2016060026
|
A 3D printed orthosis in adolescent idiopathic scoliosis(AIS) was designed and manufactured to solve the adolescent scoliosis correction problem, and an evaluation of the printing comfort was made. By using Dr. Cheneau Orthopedic theory, a 3D model of the orthosis was established. And combined with trunk constraints, the finite element analysis of the orthosis was made. Then the author blocked the model and 3D print into entity to analyze printout’s printing accuracy. On the basis of fuzzy theory and analytical hierarchy process (AHP), a subjective comfort evaluation including four influence factors of environment, material, structure and movement was designed. The results show that the 3D printing technology can achieve the manufacture of orthosis in AIS, and have a good performance in geometric accuracy and wearing comfort.
| [1] |
NACHEMSON AL,PETERSON LE.Effectiveness of treatment with a brace in girls who have idiopathic scoliosis[J].Journal of Bone and Joint Surgery (American Volume),1995,77(6):815-822.
|
| [2] |
PARENTS,NEWTON PO,WENGER DR.Adolescent idiopathic scoliosis: etiology, anatomy, natural history, and bracing[J].Instructional Course Lecture,2005,5(4):529-536.
|
| [3] |
李东方,陈继民,袁艳萍,等.光固化快速成型技术的进展及应用[J].北京工业大学学报,2015,41(12):1769-1774.
LI DF,CHEN JM,YUAN YP,et al.Development and application of stereo lithography apparatus[J].Journal of Beijing University of Technology,2015,41(12):1769-1774. (in Chinese)
|
| [4] |
靳尔刚.矫形器学概要 [M].北京:中国社会出版社,2007:67-68.
|
| [5] |
AUBIN CE,DANSEREAUJ,LABELIEH.Biomechanical simulation of the boston brace effect on a model of the scoliotic spine and thorax[J].Annales de Chirurgie,1993,47:881-887.
|
| [6] |
GIGNACD,AUBIN CE,DANSEREAUJ,et al.Optimization method for 3D bracing correction of scoliosis using a finite element model[J].European Spine Journal,2000,9:185-190.
|
| [7] |
PERIED,AUBIN CE,LACROIXM,et al.Biomechanical modelling of orthotic treatment of the scoliotic spine including a detailed representation of the brace-torso interface[J].Medical and Biological Engineering and Computing,2004,42:339-344.
|
| [8] |
NACHEMSON AL,PETERSON LE,BRADFORD DS,et al.Effectiveness of treatment with a brace in girls who have adolescent idiopathic scoliosis-a prospective, controlled- study based on data from the brace study of the scoliosis- research-society[J].Journal of Bone and Joint Surgery,1995,77:815-822.
|
| [9] |
KATZ DE,RICHARDS BS,BROWNE RH,et al.A comparison between the Boston brace and the Charleston bending brace in adolescent idiopathic scoliosis[J].Spine,1997,22(12):1302-1312.
|
| [10] |
杰克·色努.色努脊柱侧弯矫形器 [M]. 龙华译.北京:人民军医出版社,2011:1-2.
|
| [11] |
CLINJ,AUBIN CE,LABELLEH.Virtual prototyping of a brace design for the correction of scoliotic deformities[J].Medical and Biological Engineering and Computing,2007,45(5):467-473.
|
| [12] |
SHANMAM,LANGRANA NA,RODRIGUEZJ.Role of ligaments and facets in lumbar spinal stability[J].Spine,1995,20(8):887-900.
|
| [13] |
GOTOK,TAJIMAN,CHOSAE,et al.Effects of lumbar spinal fusion on the other lumbar intervertebral levels (three- dimensional finite element analysis)[J].Journal of Orthopaedic Science,2003,8(4):577-584.
|
| [14] |
VADAPALLIS,SAIRYOK,GOEL VK,et al.Biomechanical rationale for using polyetheretherketone(PEEK) spacers for lumbar interbody fusion—a finite element study[J].Spine,2006,31(26):992-998.
|
| [15] |
张德胜,宋岳明.L3—L5三维非线性有限元模型的建立及临床意义[J].生物医学工程学杂志,2006,23(6):1250-1252.
ZHANG DS,SONG YM.The reconstruction of three dimensional nonlinear finite element model of L3-L5 motion segment[J].Journal of Biomedical Engineering,2006,23(6):1250-1252. (in Chinese)
|
| [16] |
林凌云.汽车座椅静态舒适度的主客观评价方法研究 [D].长春: 吉林大学,2012:15-34.
LIN LY.Research on subjective and objective evaluation method of automobile seat static comfort level [D].Changchun: Jilin University,2012:15-34. (in Chinese)
|
| [17] |
JI ST,ZHANG YM,ZHAOJ.Effects of manufacture and assembly errors on the output error of globoidal cam mechanisms[J].International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering,2015,9(9):1494-1498.
|
| [18] |
俞峰.基于直觉区间值模糊理论的近似推理与多属性决策研究[D].南京: 南京理工大学,2007.
YUF.Research on approximate reasoning and multi-attribute decision-making based on intuitionistic-interval-valued fuzzy theory[D].Nanjing: Nanjing University of Science and Technology,2007. (in Chinese)
|
| [19] |
靳慧斌,赵振武.基于三角模糊的航空公司安全评估研究[J].电子科技大学学报,2009,11(4):21-24.
JIN HB,ZHAO ZW.Research on security assessment of airline using triangular fuzzy theory[J].Journal of University of Electronic Science and Technology,2009,11(4):21-24. (in Chinese)
|
| [20] |
DUMMEC,DA SO,SCHMIDTG,et al.Outcomes of elective labour induction and elective caesarean section in low-risk pregnancies between 37 and 41 weeks' gestation[J].J Obstet Gynaecol Can,2009,31(12):1124-1130
|
| [1] | WANG Dan, ZHAO Wenbing, DING Zhiming. Review of Big Data Security Critical Technologies[J]. Journal of Beijing University of Technology, 2017, 43(3): 335-349. DOI: 10.11936/bjutxb2016020025 |
| [2] | XIANG Pan, ZHAO Yan, LIN Jiahao. Riding Comfort Analysis for Coupled Vehicle-track Systems With Uncertain Parameters[J]. Journal of Beijing University of Technology, 2016, 42(12): 1781-1786. DOI: 10.11936/bjutxb2016080037 |
| [3] | FANG Hao-bo, CHEN Ji-min. 3D Printing Based on Digital Light Processing Technology[J]. Journal of Beijing University of Technology, 2015, 41(12): 1775-1782. DOI: 10.11936/bjutxb2015070050 |
| [4] | SHI Zhao-yao, ZHANG Bin, LIN Jia-chun, ZHANG Hua. Half Century of Coordinate Metrology Technology——Evolution and Trends[J]. Journal of Beijing University of Technology, 2011, 37(5): 648-656. |
| [5] | WU Jian, LI Hai-liang, REN Yi, LIU Shi-bing. Research for 'Function Integration and Structure Micromation' of Spectrum Detection in μTAS Field Based on Laser Micro-technology[J]. Journal of Beijing University of Technology, 2010, 36(3): 425-428. |
| [6] | JIN Jiang. Improvement of the Comfort of Cement Concrete Pavement[J]. Journal of Beijing University of Technology, 2004, 30(1): 85-88. |
| [7] | HAN Jing-yun, LI Yan-sheng, CHU Guo-min, FEI Ren-yuan. Building of Ideal Dental Crowns Model Based on Reverse Engineering[J]. Journal of Beijing University of Technology, 2003, 29(2): 141-143. |
| [8] | HAN Jing-yun, CHU Guo-min, LI Yan-sheng, FEI Ren-yuan, LÜ Pei-jun, WANG Yong, YE Shao-you. Application of Reverse Engineering in Denture Design[J]. Journal of Beijing University of Technology, 2002, 28(4): 413-417. |
| [9] | Guo Hansheng. STM and STM-Based Atom Technology[J]. Journal of Beijing University of Technology, 1998, 24(3): 124-129. |
| [10] | Hua Younian, Zhou Hongzhi, Li Dagang. The CAT/CAD System for Advanced High Frequency Technology[J]. Journal of Beijing University of Technology, 1991, 17(3): 77-85,90. |
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: