ZHANG Fuqiang, HE Jianting, SU Jinzhan. Modeling and Analyzing of a Machining-feature-oriented Initial Evolution Network Based on Multi-stage Manufacturing[J]. Journal of Beijing University of Technology, 2017, 43(6): 833-839. DOI: 10.11936/bjutxb2016030009
    Citation: ZHANG Fuqiang, HE Jianting, SU Jinzhan. Modeling and Analyzing of a Machining-feature-oriented Initial Evolution Network Based on Multi-stage Manufacturing[J]. Journal of Beijing University of Technology, 2017, 43(6): 833-839. DOI: 10.11936/bjutxb2016030009

    Modeling and Analyzing of a Machining-feature-oriented Initial Evolution Network Based on Multi-stage Manufacturing

    • In multi-stage manufacturing, it is essential to meet the quality requirements of form and precision for machining features. First, the classification of machining features was carried on, and the association relationships among machining features were defined. Then, machining features were mapped into the network nodes; and the association relationships among machining features were mapped into the network edges. A machining-feature-oriented initial evolution network was established and degree/betweeness were used to analyze the network performance. Finally, a case study was used to verify the proposed method. It is expected that this study can reveal the evolution rule of machining features in multi-stage manufacturing, and provide a theoretical support for identifying the key machining state parameters.
    • loading

    Catalog

      Turn off MathJax
      Article Contents

      /

      DownLoad:  Full-Size Img  PowerPoint
      Return
      Return