Citation: | WU Wei-wei, LI Peng, WU Shui-cai, ZHANG Yan-hua, JIA Ke-bin. Simulation and Forecast of Temperature Distribution During Temperature-controlled Radio Frequency Ablation[J]. Journal of Beijing University of Technology, 2015, 41(5): 789-796. DOI: 10.11936/bjutxb2014090035 |
[1] |
洪浪,王洪,陈在华,等.温控射频消融仪在阵发性室上性心动过速射频消融中的应用[J].江西医药,2011,46(10):880-882.HONG Lang,WANG Hong,CHEN Zai-hua,et al.The application of temperature controlled radiofrequency catheter ablation instrument for radiofrequency ablation of paroxysmal supraventricular tachycardia[J].Jiangxi Medical Journal,2011,46(10):880-882.(in Chinese)
|
[2] |
ALBA J,TRUJILLO M,BLASCO R,et al.Computermodeling to study the dynamic response of the temperature control loop in RF cardiac ahlation[C]//XII Mediterranean Conference on Medical and Biological Engineering and Computing.Chalkidiki;Springer Berlin Heidelberg,2010:725-728.
|
[3] |
戴良图,杨晓玉.温度控制和功率控制射频消融治疗子宫肌瘤临床研究[J].中国妇产科临床杂志,2007,8(5):339-342.DAI Liang-tu,YANG Xiao-yu.Study of the application of temper-controlled radiofrequency ablation and powercontrolled radiofrequency ablation in treatment of uterine myomas[J].Chinese Journal of Clinical Obstetrics and Gynecology,2007,8(5):339-342.(in Chinese)
|
[4] |
洪焦.颅内射频消融治疗的温度场分析及实验研究[D].北京:北京工业大学生命科学与生物工程学院,2012.HONG Jiao.Analysis and experiments on temperature distribution of encephalic radiofrequency ablation[D].Beijing:College of Life Science&Bioengineering,Beijing University of Technology,2012.(in Chinese)
|
[5] |
张步林,胡兵,黄瑛,等.一种与生物组织热凝固温度相似的可视化仿组织体模[J].中国医学影像技术,2007,23(9):1405-1408.ZHANG Bu-lin,HU Bing,HUANG Ying,et al.A tissuemimicking phantom for visualizing coagulation temperature distribution at the same range of biological tissue during thermal ablation[J].Chinese Journal of Medical Imaging Technology,2007,23(9):1405-1408.(in Chinese)
|
[6] |
KEANGIN P,RATTAN ADECHO P,WESSAPAN T.An analysis of heat transfer in liver tissue during microwave ablation using single and double slot antenna[J].International Communications in Heat and Mass Transfer,2011,38(6):757-766.
|
[7] |
TATOŃ G,ROK T,ROKITA E.Temperature distribution assessment during radiofrequency ablation[C]//4th European Conference of the International Federation for Medical and Biological Engineering.Antwerp:Springer Berlin Heidelberg,2009:2672-2676.
|
[8] |
CHANG I,NGUYEN U.Thermal modeling of lesion growth with radiofrequency ablation devices[J].Biomedical Engineering Online,2004,3(1):27.
|
[9] |
BERJANO E J.Theoretical modeling for radiofrequency ablation:state-of-the-art and challenges for the future[J].Biomedical Engineering Online,2006,5(1):24.
|
[10] |
YANG D,CONVERSE M C,MAHVI D M,et al.Measurement and analysis of tissue temperature during microwave liver ablation[J].IEEE Transactions on Biomedical Engineering,2007,54(1):150-155.
|
[1] | WU Shuicai, LIU Ju, ZHANG Yubo, GAO Hongjian. Ex vivo Experiment and Finite Element Simulation of Microwave Ablation on Lung Tissue[J]. Journal of Beijing University of Technology. DOI: 10.11936/bjutxb2023060026 |
[2] | GAO Hongjian, WANG Xiaoru, WU Shuicai, ZHOU Zhuhuang, BAI Yanping, GUO Peixin. Finite Element Modeling of Temperature Distribution During Temperature-controlled Radiofrequency Ablation of Liver Tumor[J]. Journal of Beijing University of Technology, 2020, 46(1): 75-81. DOI: 10.11936/bjutxb2018070026 |
[3] | LU Yu-lin, CHEN Xiao-ran, DING Jin-li. Analysis of Concrete Temperature in Early Age With Field Test and Numerical Simulation Methods[J]. Journal of Beijing University of Technology, 2013, 39(12): 1843-1848. |
[4] | QIN Fei, REN Chao. Finite Element Simulation of PoP Assembly Process[J]. Journal of Beijing University of Technology, 2012, 38(3): 330-334. |
[5] | CHEN Yong-xiong, LIANG Xiu-bing, LIU Yan, CHENG Jiang-bo, XU Bin-shi. Optical Design of Wire Arc Spray Gun Based on Finite Element Modeling[J]. Journal of Beijing University of Technology, 2011, 37(2): 253-259. |
[6] | YE Le-zhi, LI De-sheng. Eddy Current Field Analysis in Permanent Magnet Retarder Based on Finite Element Method[J]. Journal of Beijing University of Technology, 2010, 36(12): 1613-1617. |
[7] | YANG Yan-fang, CHEN Ding-fang, CENG Yan-jun, ZHANG Bo. Simulation of Corneal Tissue Mechanical Deformation Based on the Finite Element Method[J]. Journal of Beijing University of Technology, 2008, 34(1): 85-89. |
[8] | YU Jian-gong, WU Bin, HE Cun-fu. The Finite Element Simulation of a Longitudinal Defect Detection in an Anisotropic Cylindrical Curved Plate by Guided Circumferential Waves[J]. Journal of Beijing University of Technology, 2007, 33(6): 567-571. |
[9] | Li Junqin, Zheng Yi, Fei Renyuan. Finite Element Analysis of Offset Press Fountain and its Structure Modification Prediction[J]. Journal of Beijing University of Technology, 1998, 24(2): 97-101. |
[10] | Xu Feng, Hu Peiqing, Yang Huizhen. Computer Graphic Processing for Seawater Temperature Data by the Finite Element Method[J]. Journal of Beijing University of Technology, 1993, 19(3): 61-68. |