3-PTT并联微操作机器人机构误差分析

基金项目:

国家自然科学基金资助项目(69885001).

详细信息

Analysis on Mechanical Errors of 3-PTT Parallel Connection Micromanipulator

College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022, China

摘要: 通过矢量分析方法,分别讨论了3—PTT并联机构和两级3-PTT串并联微操作机器人机构的误差建模,研究了关节误差和驱动输入误差与机器人输出误差之间的关系,得到机器人机构的误差模型方程,为微操作机器人的误差补偿提供理论指导.
- 并联机器人 /
- 误差分析 /
- 微操作
Abstract: The vector analysis method is employed to discuss the error modeling of 3-PTT parallel connection mechanism and two series 3-PTT series and parallel micromanipulator mechanism, and respectivey study the relationships between the articulation errors and the manipulator output errors and between the actuation input errors and the manipulator output errors. Thus the errors model equation of manipulator mechanism is obtained, which provides the theoretical guidance for the error compensation of micromanipulator.
- parallel connection manipulator /
- error analysis /
- micromanipulation

[1]	黄真,孔令富,方跃法.并联机器人机构学理论及控制[M].北京:机械工业出版社,1997.12.
[2]	费仁元,许意华,刘德忠,等.两级串并联微动机器人的研制[J].中国学术期刊文摘,2001,7(2):242-244.
[3]	BI Shusheng, ZONG Guanghua, LIU Rong, et al. Accuracy analysis of the serial-parallel micro-motion manipulator[A]. Proceedings of the IEEE International Conference on Systems, Man and Cybernetics[C]. NJ:IEEE, 1997, 3:720-724.