高级检索
    郭晓东, 翟庆富, 张卫青, 张明德, 孙秀文. 未知参数锥齿轮齿形测量方法[J]. 北京工业大学学报, 2010, 36(6): 735-741.
    引用本文: 郭晓东, 翟庆富, 张卫青, 张明德, 孙秀文. 未知参数锥齿轮齿形测量方法[J]. 北京工业大学学报, 2010, 36(6): 735-741.
    shu
    GUO Xiao-dong, ZHAI Qing-fu, ZHANG Wei-qing, ZHANG Ming-de, SUN Xiu-wen. Research on Tooth Form Measuring of Unknown Parameters Bevel Gear[J]. Journal of Beijing University of Technology, 2010, 36(6): 735-741.
    Citation: GUO Xiao-dong, ZHAI Qing-fu, ZHANG Wei-qing, ZHANG Ming-de, SUN Xiu-wen. Research on Tooth Form Measuring of Unknown Parameters Bevel Gear[J]. Journal of Beijing University of Technology, 2010, 36(6): 735-741.
    shu

    未知参数锥齿轮齿形测量方法

    Research on Tooth Form Measuring of Unknown Parameters Bevel Gear

      摘要
    • 摘要: 提出了未知参数锥齿轮齿形测量方法并进行了齿形偏差计算,利用Microsoft VC++编写了基于哈量集团制造的3906型齿轮测量中心的测量软件.运用该软件进行了测量实验,验证了测量方法的正确性和软件的可行性.

       

      Abstract: The tooth form measuring method of unknown parameters bevel gear is proposed.And the tooth form deviation is calculated.The implementation software has been developed using Microsoft VC++ based on the type 3906 gear measuring center manufactured by Harbin Measuring Cutting Tool Group Co.,Ltd.The measuring experiments show that the measuring method is correct and the software is feasible.

       

      • HTML全文
      • 参考文献(0)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回