高级检索
    王民, 费仁元, 杨建武, 吴季茂, 关剑, 刘璇. 基于电流变材料的变刚度切削颤振在线控制方法[J]. 北京工业大学学报, 2001, 27(4): 456-459.
    引用本文: 王民, 费仁元, 杨建武, 吴季茂, 关剑, 刘璇. 基于电流变材料的变刚度切削颤振在线控制方法[J]. 北京工业大学学报, 2001, 27(4): 456-459.
    shu
    WANG Min, FEI Ren-yuan, YANG Jian-wu, WU Ji-mao, GUAN Jian, LIU Xuan. Application of Varying Stiffness Method in Machining Chatter Control[J]. Journal of Beijing University of Technology, 2001, 27(4): 456-459.
    Citation: WANG Min, FEI Ren-yuan, YANG Jian-wu, WU Ji-mao, GUAN Jian, LIU Xuan. Application of Varying Stiffness Method in Machining Chatter Control[J]. Journal of Beijing University of Technology, 2001, 27(4): 456-459.
    shu

    基于电流变材料的变刚度切削颤振在线控制方法

    Application of Varying Stiffness Method in Machining Chatter Control

      摘要
    • 摘要: 提出了一种变刚度颤振控制理论,并为了在镗削加工中采用变刚度理论控制颤振,采用电流变材料设计了一刚度可在线调控的智能型镗杆.实验与分析表明,所提出的变刚度颤振控制方法可以有效地抑制切削加工颤振的发生,而且具有控制方法容易实现和系统结构简单的优点.

       

      Abstract: To propose a varying stiffness theory for on-line chatter control and design an intelligent boring bar which can regulate and control stiffness on line using an electrorheological fluid. The experimental results show the effectiveness of this method. Compared with other chatter control methods, this method possesses some merits including the simplicity of the system structure and the easiness of the implementation.

       

      • HTML全文
      • 参考文献(0)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回