丙烯酸酯乳液影响因素的研究

详细信息

Study of Factors Influencing Properties of Acrylic Emulsion

1. College of Environment and Energy Engineering, Beijing Polytechnic University, Beijing 100022, China

摘要: 研究了乳化剂配比、缓冲剂加入方式、玻璃化温度(T_g)、聚合工艺对乳液性能的影响.结果表明:采用非离子型乳化剂较多的复合乳化剂配比和缓冲剂在反应前一次性加入的方式有利于提高丙烯酸酯乳液的稳定性,从而获得符合要求的乳液;聚合物体系的T_g、聚合工艺对乳液性能影响较大,采用软壳硬核的聚合工艺设计可大大降低最低成膜温度(MFT).
- 丙烯酸酯乳液 /
- 缓冲剂 /
- 玻璃化温度 /
- 聚合工艺
Abstract: The effects of the proportion of emulsifier, the feeding mode of buffer agent, the glass transition temperature(Tg) on the properties of acrylic emulsion were studied. The results show that the stability of acrylic emulsion is increased by using more nonionic emulsifier and feeding the buffer agent before polymerization wholly. The required emulsion can be obtained in this way. The properties of acrylic emulsion are deeply affected by glass transition temperature and polymerizing technology and the lowest-filming temperature is decreased greatly by using the polymeric design of soft-shell and hard-core.
- acrylic emulsion /
- buffer agent /
- glass transition temperature /
- polymerizing technology

[1]	余樟清,李伯耿,潘祖仁.影响MMA-BA-DMAEMA三元共聚物乳胶粒粒径及分布的因素[J].涂料工业,1997(5):5-6.
[2]	曹同玉,刘庆普,胡金生.聚合物乳液合成原理性能及应用[M]北京:化学工业出版社,1997.
[3]	刘正平,刘夙歧,罗晓韬,等.外交联型丙烯酸系共聚乳液的研究[J].涂料工艺,1992(4):6-10.
[4]	刘国杰,耿跃宗.涂料应用科学与工艺学[M].北京:中国轻工业出版社,1994.
[5]	刘方方,孙立明,牛魁哲.聚合工艺和组成对苯丙乳液最低成膜温度的影响[J].中国胶粘剂,2000,9(2):27-29,
[6]	李克友,张菊华,向福如.高分子合成原理及工艺学[M].北京:科学出版社,1999.173.