• 综合性科技类中文核心期刊
    • 中国科技论文统计源期刊
    • 中国科学引文数据库来源期刊
    • 中国学术期刊文摘数据库(核心版)来源期刊
    • 中国学术期刊综合评价数据库来源期刊

弧焊电源传导骚扰试验研究

陈树君, 杜利, 卢振洋, 刘泽伟, 殷树言

陈树君, 杜利, 卢振洋, 刘泽伟, 殷树言. 弧焊电源传导骚扰试验研究[J]. 北京工业大学学报, 2007, 33(10): 1044-1047.
引用本文: 陈树君, 杜利, 卢振洋, 刘泽伟, 殷树言. 弧焊电源传导骚扰试验研究[J]. 北京工业大学学报, 2007, 33(10): 1044-1047.
CHEN Shu-jun, DU Li, LU Zhen-yang, LIU Ze-wei, YIN Shu-yan. Measurement of and Study on Conducted EMI of Arc Welding Inverter[J]. Journal of Beijing University of Technology, 2007, 33(10): 1044-1047.
Citation: CHEN Shu-jun, DU Li, LU Zhen-yang, LIU Ze-wei, YIN Shu-yan. Measurement of and Study on Conducted EMI of Arc Welding Inverter[J]. Journal of Beijing University of Technology, 2007, 33(10): 1044-1047.

弧焊电源传导骚扰试验研究

基金项目: 

北京市科技新星计划资助(H020821230120)

国家科技部资助项目资助(2003EG119072).

详细信息
    作者简介:

    陈树君(1971-),男,黑龙江双城人,教授.

  • 中图分类号: TM930

Measurement of and Study on Conducted EMI of Arc Welding Inverter

  • 摘要: 弧焊电源工作时产生的传导骚扰,不仅会影响设备本身的正常工作,还可能会对同一电网中其他用电设备产生干扰.针对常见的几类弧焊电源进行了传导骚扰发射试验,分析了弧焊电源中传导骚扰的产生机理,提出了传导骚扰抑制方案,通过滤波器拓扑结构和元件参数的选择对弧焊电源进行整改,试验结果显示满足IEC 60974—10中对弧焊电源传导发射的限值要求.
    Abstract: The conducted emission generated by arc welding power source not only may affect devices connect- ed in the same main supply,but also may result in mal-function of itself.In this paper,many types of arc welding power sources were tested for conducted emission.The mechanism of conducted emission is analyzed and the suppression method is developed.The re-design of arc welding power source can meet the conducted emission requirement of IEC 60974-10 and has been verified by experiments.
  • [1] 黄石生,李远波.吴祥淼,等.大功率弧焊逆变器的电磁兼容性设计研究[J].电焊机,2003,33(5):11-13.HUANG Shi-sheng,LI Yuan-bo,WU Xiang-miao.EMC design of high power arc welding inverter[J].Welding Machine, 2003,33(5):11-13.(in Chinese)
    [2] 邓集杰,路登平,刘建屏.等.国内弧焊设备电磁兼容性研究进展[J].电焊机,2003,33(9):1-4.DENG Ji-jie,LU Deng-ping,LIU Jian-ping.Research of EMC performance of arc welding machine[J].Welding Machine, 2003,33(9):1-4.(in Chinese)
    [3]

    FANG Lin-luo,HONG Ye.Investigation of EMI,EMS and EMC in power DC/DC converters[J].Power Electronics and Drive Systems,2003,1:572-577.

    [4]

    International Speciai Committee on Radio Interference,Industrial.scientific and medical (ISM)radio-frequency equipment- Radio disturbance characteristics-Limits and methods of measurement CISPRII[S],London:CISPR,2003.

    [5]

    International Electroteehnical Commission,Arc welding equipment-Part 10:Electromagnetic compatibility (EMC)IEC 60974—10[S],Geneva:IEL,2002.

    [6]

    ZHANG Yong-gao,ZHANG Kai,ZHOU Yun-bin,et al.Common mode EMI suppression based on simulated annealing algorithm[J].Intelligent Control and Automation,2006,2:844-8452.

    [7]

    XUE Wen-yan,CHEN Xiao,MA Xi-kui.Analysis and reduction of conducted EMI from an AC/DC high power converter, Microwave[J].Antenna,Propagation and EMC Technologies for Wireless Communications,2005,1:503-506.

    [8]

    ZHONG Er-kuan,THOMAS A.Improvements in EMC performance of inverter-fed motor drives[J].IEEE Trans.Industry Application,1995,31(6):1247-1256.

计量
  • 文章访问数:  7
  • HTML全文浏览量:  0
  • PDF下载量:  6
  • 被引次数: 0
出版历程
  • 收稿日期:  2006-09-25
  • 网络出版日期:  2022-12-29

目录

    /

    返回文章
    返回