Development of Modern Laser Manufacturing
-
摘要: 为了提升我国传统制造业的技术水平,为激光制造技术在工业生产中的更广泛应用提供科学依据,介绍了激光制造技术和制造系统在国内、外的应用发展状况,强调了工业用激光器光束质量的重要性,指出激光制造系统的不断进步就是激光器光束质量不断提高的过程;另一方面,提出激光技术在应用领域的扩展和超短、超快光源是这一领域的前沿.最后,文章提出几点建议,供政府、企业和研究单位共同思考.Abstract: In order to improve the technology of Chinese traditional manufacturing industry and extensively apply the laser manufacturing technology to industrial production, the author introduces the recent development of the application of laser manufacturing technology and system in the internal and external, stresses the importance of laser beam quality in industry and points out that the constant progress of laser manufacturing system is just the process of constant improvement of laser beam quality; On the other hand, more extensive application of laser technology and ultra-short and ultra-fast laser source are considered the forward position of this science. Finally, some suggestions are put fomward to give reference to government, enterprises and research units.
-
Keywords:
- laser manufacturing /
- lasers /
- beam quality /
- ultra-short and ultra-fast illuminant
-
-
[1] 关振中.激光加工工艺手册[M].北京:中国计量出版社,1998. 47-57. GUAN Zhen-zhong. Manual Book of Laser Processing[M]. Beijing: Chinese Measurement Publication, 1998. 47-57. (in Chinese) [2] 陈继民,左铁钏.三维工件激光切边的自动编程[J].制造技术与机床,2002,2:28-29. CHEN Ji-min, ZUO Tie-chuan. Automatic programming for 3D-laser edge-cutting[J]. Manufacturing Technology and Machine, 2002(2) : 28-29. (in Chinese) [3] 陈涛,王智勇,陈铠,等.激光加工技术在汽车车身大型覆盖件中的应用[J].中国机械工程,2002,13(1) :8-11. CHEN Tao, WANG Zhi-yong, CHEN Kai, et al. Laser materials processing technology applied in large scaleautobody panel[J]. Chinese Mechanical Engineering, 2002, 13(1) : 8-11. (in Chinese) [4] WANG Z Y, CHEN T, HE P, et al. Calculation of mode contents of high-power CO2 laser beam according tothe changes of transverse intensity distribution[J]. Optics Communications, 2000, 175: 215-220.
[5] GAO C, WEBER H. The problems with M2[J]. Optics & Laser Technology, 2000, 32: 221-224.
[6] de TOMASI F, PERRONE M R, PROTOPAPA M L. Evolution of the beam quality factor for various activemedium positions within a Gaussian cavity[J]. Optics Communications, 2001, 195: 315-325.
[7] LU Bai-da, LUO Shi-rong. Beam propagation factor of hard-edge diffracted cosh-Gaussian beams[J]. OpticsCommunications, 2000, 178: 275-281.
[8] UPADHYAYA B N, MISRA P, RANGANATHAN K, et al. Beam quality consideration of high power Nd:YAG lasers[J]. Optics & Laser Technology, 2002, 34: 193-197.
[9] 左都罗,李适民.快轴流CO2激光器评述[J].激光技术,2000,24(1) :4-8. ZUO Du-luo, LI Shi-min. Review of fast axial flow CO2 laser[J]. Laser Technology, 2000, 24(1) : 4-8. (in Chinese) [10] 柳强,巩马理,闰平.LD泵浦的Yb:YAG激光器最新进展[J].激光与红外,2002,32(1) :3-6. LIU Qiang, GONG Ma-li, YAN Ping. Recently development of diode-pumped Yb:YAG laser[J]. Laser & Infrared, 2002, 32(1) : 3-6. (in Chinese) [11] 黄春宁,李岩.几种新型LD泵浦的Nd:YAG双频激光器[J].光学技术,2002,28(5) :409-418. HUANG Chun-ning, LI Yan. Several kinds of novel dual-frequency Nd:YAG laser pumped by LD[J]. Optical Technique, 2002, 28(5) : 409-418. (in Chinese) [12] 杨青,俞本立,甄胜乐.光纤激光器的发展现状[J].光电子技术与信息,2002,15(5) :13-18. YANG Qing, YU Ben-li, ZHEN Sheng-le. The survey of optic fiber lasers[J]. Optoelectronic Technology & Information, 2002, 15(5) : 13-18. (in Chinese) [13] ZUO Tie-chuan, CHEN Ji-min. Laser microfabrication system to process micromachine[A]. Precision Engineering and Nano Technology[C]. Changsha: National University of Defense Technology Press, 2002. 283-286.
计量
- 文章访问数: 10
- HTML全文浏览量: 0
- PDF下载量: 6
下载:
